diff options
Diffstat (limited to 'snd-alpx/tools')
| -rwxr-xr-x | snd-alpx/tools/audio_card_update_firmware.sh | 99 | ||||
| -rwxr-xr-x | snd-alpx/tools/build-load-script.sh | 111 | ||||
| -rwxr-xr-x | snd-alpx/tools/build_driver_pkg.sh | 28 | ||||
| -rwxr-xr-x | snd-alpx/tools/build_virtual_board_alsa_conf.sh | 79 |
4 files changed, 0 insertions, 317 deletions
diff --git a/snd-alpx/tools/audio_card_update_firmware.sh b/snd-alpx/tools/audio_card_update_firmware.sh deleted file mode 100755 index 9dfa0c7..0000000 --- a/snd-alpx/tools/audio_card_update_firmware.sh +++ /dev/null @@ -1,99 +0,0 @@ -#!/bin/bash - - -# This script is used to update the firmware of the card FOR Audio card only (Alpxxy) with x and y are numbers. -# Param 1 : mtd partition number of the "fw-user-updatable", see /proc/mtd file and select -# the one of the to be updated card. -#Param 2 : firmware complete filepath - -#NOTE : use BASH read, SH read : follow https://stackoverflow.com/questions/226703/how-do-i-prompt-for-yes-no-cancel-input-in-a-linux-shell-script - - -user_manual(){ - echo "Param 1 : mtd partition number of the \"fw-user-updatable\", see /proc/mtd file and select" - echo "Param 2 : firmware complete filepath" - echo "Check user can write to the mtd partition's file" - return 0 -} - - -## MAIN ## -# warn about supported card -#Warn about the card supported model : Alp Audio card. -read -r -n 1 -p "WARNING: This is only for AUDIO based Alp cards (ie Alp222, Alp882 and Alp442) update ? [y/N]:" user_resp - -echo # (optional) move to a new line -if [[ ! "$user_resp" =~ ^[Yy]$ ]] -then - # handle exits from shell or function but don't exit interactive shell - [[ "$0" = "$BASH_SOURCE" ]] && echo "CANCELED by User" && exit 1 || return 1 -fi - - -#Check parameters -[ "$#" -ne "2" ] && user_manual && exit 1 - -fw_partition_path="$1" -source_fw_file="$2" - - - -# /dev/mtd is a character device -[ ! -c "$fw_partition_path" ] && echo "$fw_partition_path Not a C Device" && exit 2 -#Write access ? -[ ! -w "$fw_partition_path" ] && echo "Not writeable" && exit 2 - -# firmware file condition -[ ! -e "$source_fw_file" ] && user_manual && exit 2 -[ ! -f "$source_fw_file" ] && user_manual && exit 2 -[ ! -s "$source_fw_file" ] && user_manual && exit 2 -[ ! -r "$source_fw_file" ] && user_manual && exit 2 - -#Check available space !! TODO -# It Requires firmware size + 4kB for the extracted HEADER. - -#read : BASH extensions used ! -read -r -n 1 -p Writing\ "$source_fw_file"\ to\ "$fw_partition_path ? [y/N]: " user_resp - -echo # (optional) move to a new line -if [[ ! "$user_resp" =~ ^[Yy]$ ]] -then - # handle exits from shell or function but don't exit interactive shell - [[ "$0" = "$BASH_SOURCE" ]] && echo "CANCELED by User" && exit 1 || return 1 -fi - -dd if="$source_fw_file" of=fw_header.bin bs=4096 count=1 status=none -if [ "$?" -ne "0" ] ; then - echo "Error when preparing the firmware, check disk size please." - exit 4; -fi - -dd if="$source_fw_file" of=fw_body.bin bs=4096 skip=1 seek=1 status=none -if [ "$?" -ne "0" ] ; then - echo "Error when preparing the firmware, check disk size please." - exit 4; -fi - - -echo "Updating first phase ..." -cat fw_body.bin > "$fw_partition_path" -if [ "$?" -ne "0" ] ; then - echo "!! Update failed DON'T poweroff, correct to retry." - rm -f fw_body.bin fw_header.bin - exit 3; -fi - -echo "Updating second phase ..." -cat fw_header.bin > "$fw_partition_path" - -if [ "$?" -ne "0" ] ; then - echo "!! Update failed DON'T poweroff, correct to retry." - rm -f fw_body.bin fw_header.bin - exit 3; -fi - -echo "Update SUCCEEDED" - -rm -f fw_body.bin fw_header.bin - -exit 0 diff --git a/snd-alpx/tools/build-load-script.sh b/snd-alpx/tools/build-load-script.sh deleted file mode 100755 index 76e0174..0000000 --- a/snd-alpx/tools/build-load-script.sh +++ /dev/null @@ -1,111 +0,0 @@ -#!/bin/bash -#This script will build the manual launch script for the Alpx cards' driver. - -TEXT_BOLD="\e[1m" -TEXT_BLUE="\e[34m" -TEXT_RED="\e[31m" -TEXT_RESET="\e[0m" - -manual_load_script_name="$1" -ALPX_SOUND_DRIVER_NAME="snd-alpx.ko" -ALPX_DMA_DRIVER_NAME="snd-alpx-xdma.ko" - -OPTIONS_REQUIRED=("CONFIG_MTD" "CONFIG_DMA_VIRTUAL_CHANNELS" "CONFIG_SND_PCM") -OPTIONS_OPTIONAL=("CONFIG_SND_DMAENGINE_PCM") - -module_for_option() -{ - option=$1 - - case $option in - "CONFIG_MTD") - echo "mtd" - ;; - "CONFIG_DMA_VIRTUAL_CHANNELS") - echo "virt-dma" - ;; - "CONFIG_SND_DMAENGINE_PCM") - echo "snd-pcm-dmaengine" - ;; - "CONFIG_SND_PCM") - echo "snd-pcm" - ;; - esac -} - -required_module_entry() -{ - option=$1 - module_name=$( module_for_option "$option" ) - - echo -e $TEXT_BOLD$TEXT_BLUE"Option $option was built as a module and will be loaded" - echo -e "echo 'loading required module : $module_name'" >> $manual_load_script_name - echo -e "modprobe $module_name" >> $manual_load_script_name -} - -build_launch_script() -{ - list=$( cat - ) - - if [ -f "$manual_load_script_name" ] - then - rm "$manual_load_script_name" - echo -e "#!/bin/bash" >> $manual_load_script_name - fi - - for option in ${OPTIONS_REQUIRED[@]} - do - match_y=$( echo "$list" | grep -P "^$option=y" ) - match_m=$( echo "$list" | grep -P "^$option=m" ) - - if [ -z "$match_y" ] && [ -z "$match_m" ] - then - echo -e $TEXT_BOLD$TEXT_RED"Missing required option $option!"$TEXT_RESET - return 1 - fi - - if [ -n "$match_m" ] - then - required_module_entry "$option" - fi - done - - for option in ${OPTIONS_OPTIONAL[@]} - do - match_m=$( echo "$list" | grep -P "^$option=m" ) - - if [ -n "$match_m" ] - then - required_module_entry "$option" - fi - done - - - - if [ -f "$manual_load_script_name" ] - then - chmod u+x "$manual_load_script_name" - fi - - #NO> add the drivers entries themselves - echo -e "echo 'loading the dma driver : $ALPX_DMA_DRIVER_NAME '" >> $manual_load_script_name - echo -e "insmod $ALPX_DMA_DRIVER_NAME" >> $manual_load_script_name - echo -e "echo 'loading the sound driver : $ALPX_SOUND_DRIVER_NAME '" >> $manual_load_script_name - echo -e "insmod $ALPX_SOUND_DRIVER_NAME" >> $manual_load_script_name - - - echo -e $TEXT_RESET -} - -config_path="/boot/config"-$( uname -r ) - -if [ -f "/proc/config.gz" ] -then - cat /proc/config.gz | gunzip | build_launch_script -elif [ -f "$config_path" ] -then - cat "$config_path" | build_launch_script -else - echo "No config path found, unable to check!" >&2 - exit 1 -fi diff --git a/snd-alpx/tools/build_driver_pkg.sh b/snd-alpx/tools/build_driver_pkg.sh deleted file mode 100755 index ef568bd..0000000 --- a/snd-alpx/tools/build_driver_pkg.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash - -#This script will create the driver source archive with the given tag, name compilant with dkms -# and put it in the destination dir - -print_help() { - echo -e "This script requires 2 parameters : \n\t 1: version tag \n\t 2: destination directory" -} - -## MAIN ## -#Check parameters -echo "starting $0 with $#" - -[ ! "$#" -eq "2" ] && print_help && exit 1 - -version_tag=$1 -dest_dir=$2 - -##Handle HEAD as a Special value -if [ "$version_tag" == "HEAD" ] -then - version=$version_tag -else - version=${version_tag:2} -fi - -echo "get ready for the archive V: $version_tag, from tag: $version_tag to $dest_dir/snd-alpx-$version.zip ..." -git archive --format=zip -9 --prefix="snd-alpx-$version/" "$version_tag" > "$dest_dir/snd-alpx-$version.zip" diff --git a/snd-alpx/tools/build_virtual_board_alsa_conf.sh b/snd-alpx/tools/build_virtual_board_alsa_conf.sh deleted file mode 100755 index 3e8a605..0000000 --- a/snd-alpx/tools/build_virtual_board_alsa_conf.sh +++ /dev/null @@ -1,79 +0,0 @@ -#!/bin/bash -## This script will print an asoundrc stream which add virtual boards from one physical board. -## Output must be directed into a file to be stored - -### FUNCTIONS ### -user_manual() { - echo "Required Parameters - 1. Phy board id like "hw:CARD=Alp882e,DEV=0" - 2. Phy board channels quantity - 3. Virtual boards base name like : \"Emulated analog Alp222\" - 4. Virtual boards channels quantities (2: stéréo, ...)" >&2 -} - - -build_phy_node() { - node_type=$1 - card_id=$2 - channels_qty=$3 - echo -e "pcm_slave.$node_type { \n pcm \"$card_id\"\n channels $channels_qty\n }\n" -} - -build_virtual_node() { -node_alias=$1 -node_type=$2 -node_id=$3 -ipc_key=$4 -phy_name=$5 -phy_channels_base=$6 -phy_channels_qty=$7 -description=$8 -direction=$9 - -echo -e "pcm.$node_alias$node_id { - type $node_type - ipc_key $ipc_key - ipc_key_add_uid true - slave $phy_name" - - for channel_id in $(seq 0 "$(($phy_channels_qty-1))") - do - echo -e "\tbindings.$channel_id $(($channel_id+$phy_channels_base))" - done - - - echo -e "\thint.description" \"$description \#$node_id $direction\" - echo -e "}\n" -} - -### MAIN ### - -[ "$#" -ne "4" ] && user_manual && exit 1 - -ipc_key=$(date +%N) -card_id=$1 -channels_qty=$2 -virtual_basename=$3 -stream_width=$4 -virt_qty=$(($channels_qty / $stream_width)) - -echo "#Building Alsa sound RC file for $virt_qty virtual boards of $stream_width channels from physical board $card_id with $channels_qty." - -##Build the entries first -build_phy_node "ins" "$card_id" "$channels_qty" - -for entry_idx in $(seq 0 $(($virt_qty-1))) -do - build_virtual_node "mic" "dsnoop" "$entry_idx" "$ipc_key" "ins" "$(($stream_width * $entry_idx))" "$stream_width" "virtual Alp-$stream_width" "in" -done - -##Now the outpus -build_phy_node "outs" "$card_id" "$channels_qty" - -ipc_key=$(date +%N) - -for entry_idx in $(seq 0 $(($virt_qty-1))) -do - build_virtual_node "out" "dshare" "$entry_idx" "$ipc_key" "outs" "$(($stream_width * $entry_idx))" "$stream_width" "virtual Alp-$stream_width" "out" -done - |